It is the installer/ owners�� responsibility to ensure that the jobsite conditions and jobsite sub floor are environmentally and structurally acceptable prior to the installation of any hardwood flooring. WPC Board Manufacturers in India
The manufacturer shall not have any responsibility for failures or deficiencies of hardwood flooring resulting from or related to sub-floor, sub-surface, or job-site environmental conditions. Cheap Deck Flooring
All substrates must be clean, flat,dry, and structurally sound.All sub floors and sub floor systems must be structurally sound and must be installed following their manufacturer's recommendations. Outdoor Flooring Materials
Local building codes may only establish minimum requirements of the flooring system and may not provide adequate rigidity and support for proper installation and performance of a hardwood floor. Whenever possible install the flooring perpendicular to the floor joists for maximum stability. Our warranties DO NOT cover any problems caused by inadequate substructures or improper
installation of said substructures.
Test wood sub floors and wood flooring for moisture content using a pin-type moisture meter. Take readings of the subfloor �C minimum of 20 readings per 1000 sq. ft.and average the results. In most regions, a ��dry�� subfloor that is ready to work on has a moisture content of 12% or less. For solid strip flooring (less than 3�� wide) there
should be no more than a 4% difference between the wood and subfloor. For plank flooring (3�� or wider) there should be no more than a difference of 2% between properly acclimated wood and subfloor. Failure to test for proper moisture content of the wood flooring and subfloor