WALL BASE This molding accents the wood foor at the base of the walls. It gives any room a formal fnished look, while maintaining a crisp, sharp juncture between the foor and wall. This molding can be used with or without Quarter Round.wood plastic composite in india qUARTER ROUND The rounded profle of this molding creates a subtle blend between the foor and the wall. It can be used with or without Wall Base molding. Install Mannington Commercial wood moldings using traditional methods. Simply nail moldings into place with clean fnishing nails. Follow the instructions below for specifc installation techniques on each molding. UARTER ROUND & WALL BASE Nail Quarter Round and Wall Base molding into the wall with fnishing nails. Wall Base and Quarter Round can either be used separately or together, each achieving a different look and style.


Do not fasten these moldings directly into the fooring. They should... foor so as not to bind or jam the fooring. Step Nosing requires a unique installation method. Glue the wood fooring and Step Nosing directly to the stair tread using Mannington UltraSpread Mastic?. When installing T-Molding, Baby Threshold, or Reducer Strip, frst drill small holes in the molding to avoid wood splits. Using the drilled holes as your guide, hammer fnishing nails directly into the subfoor every 18". This research has shown that CCA treated wood can be recycled from residential decks.wpc outdoor decking The physical and chemical properties of the recovered wood were found suitable to use in several applications. Also a large majority of the CCA treated deck was recoverable, but questions arise if this number could be increased by designing decks that the CCA wood composing them is easily recovered, without sacrificing the performance of the deck. Reverse engineering concepts could be studied in the construction of new decks to analyze how the style, location, hardware, component design (railing, steps, decking, etc.)


and deck finishes affect the recoverability of a deck, and how to design and engineer decks accordingly. This would help building contractors and recyclers easily convert the spent CCA treated wood into reusable material. Several programs need to be initiated by local governments and recycling organizations. These organizations need to network with construction firms and recyclers to encourage the reuse of CCA wood waste.wood plastic deck boards This can be achieved through programs such as the reduction of tipping fees for building contractors that have separated loads of CCA treated wood waste. Also, programs need to be developed that show the advantages of separating the CCA treated wood waste, and the markets that are available for recycled CCA treated wood. The government and recycling organizations need to publicize recovery processes of CCA treated wood from residential decks, and distribute them by mailings, fact sheets, and case studies to consumers of the recovered material, building contractors, and landfills. The lack of identifiable markets for recyclers of CCA treated wood is currently a .