NIS-CO Co. has developed many types of Industrial Make Up Air Units for larger industrial plants ventilation needs. An improvement in the at industrial facilities environment can produce substantial benefits in terms of increased production Cheap Edgar Martinez Jersey , reduced errors, and a decline in complaints and absenteeism among employees.

Air-Handling Units for Make-Up Air and Space Pressurization Applications have the following features:

- Outlet Temperature is usually monitored with a probe mounted near the outlet of the unit.

- Discharge Air Temperature is set at the control panel or using a remote control station.

- Gas input is “modulated” using a butterfly valve, actuator, and controller.

For Space Heating Applications, a room thermostat is used to control outlet temperature. On a call for heat, the unit will provide air heated to the maximum allowed temperature until the room thermostat is satisfied. Once satisfied, the unit will either turn off or will continue to operate at a reduced outlet temperature.

An override option may also be supplied. In this case a room thermostat is supplied in addition to the basic system. The unit is set to full-fire when room temperature falls too low.

Direct Spark units are supplied with an ignition transformer for the igniter.

Piloted Units are supplied with a solenoid-operated Automatic Pilot Valve and a small pressure regulator – around 20 Cheap Felix Hernandez Jersey ,000 BTU – as well as an ignition transformer for the pilot spark igniter.

Pre-purge of the system (by starting the blower for a specified time to provide a minimum air volume change) before ignition of main burner is not required by ANSI code, but is frequently specified by the user. This should be provided whenever a building contains flammable dusts or vapors that could potentially reach and collect within a direct gas-fired unit while it is idle.

To assure safe operation of a direct gas-fired heating system, a number of Safety Interlocks are commonly provided:

A. Damper Limit Switch – Dampers must be fully open before unit will operate.

B. Air Proving Switch – Located near outlet of unit to prove air flow before igniting burner.

C. Flame Supervision – Discussed above. Shuts down unit on flame failure.

D. High Temperature Limit – Signals unit to reduce gas supply when maximum allowable temperature is reached. If air temperature exceeds limit, the unit is shut down.

E. High Gas Pressure Switch – Shuts down unit to protect regulator against spikes in inlet gas pressure.

F. Low Gas Pressure Switch – Shuts down unit when low inlet pressure detected. Redundant safety device, since low flame would also shut down unit.

G. Safety Shut-off Valve – Responds to various inputs listed above – closes off gas supply.

Direct Gas-Fired Air Heating Systems are a class of equipment utilized primarily in industrial and commercial environments to provide for worker comfort. To a lesser extent, these systems are used to condition air for process and finishing applications such as material drying and paint curing.

Direct-fired pressurization units are approximately 93% efficient, with much of the available energy in the burned natural gas being delivered to the space in the form of heat. The supply airstream absorbs the heat that would be normally lost through a flue or vent pipe as in the indirect-fired configuration.

Additional information can be found at the NIS-CO web site http:northernindustrialsupplycompanycompany

Oleg Cthetchel
Industrial Air Handling Systems Engineer
NIS-CO
nisco@nisco.net
http:www.northernindustrialsupplycompanyprodu... Death is a matter that people do not like to think about. No one likes to think that his relative or friend will disappear from his life one day. When this happens Cheap Nelson Cruz Jersey , people start thinking about having a proper funeral process. There are so many things to consider here. The funeral may be a complex process, the planning of which includes many stages. The first thing is to decide where the deceased person will be buried. The next step is to choose the casket. Some caskets are adorned with gold when there are also simple wooden variants. Not having enough time and strength, the family of the deceased person may be lost. In such cases, the best option is to use the services of a funeral agency.

The funeral agency provides clients with the main information about the procedure. Contacting different agencies, clients find out about special offers and funeral plans Sheffield. They also get all the information about the schedule of most funerals and all the relevant things. Most funeral rituals consist of three parts. During the visitation part, friends and family can sign a book where they can write about feelings and think about the life of the deceased person. The second part is the funeral. People may pray during the ceremony, read from the Bible Cheap Robinson Cano Jersey , and sing hymns. Some friends or relative may give a eulogy. During the burial service, the body is buried or cremated. The close relatives of the deceased person may also carry the casket from the chapel to the site of the burial service.

Funeral agencies take care of all the procedures and services connected to the funeral. Funeral directors Sheffield are famous for providing clients with all the needed help and support. They consult clients concerning the most appropriate casket. They also provide information about different services and options. Besides, funeral directors help in choosing the headstone. They provide with pieces of advice concerning the design, engravi. Cheap Jerseys Wholesale Jerseys Cheap NFL Jerseys Cheap Jerseys Free Shipping Cheap NFL Jerseys China Wholesale Jerseys China Cheap NFL Jerseys Wholesale Jerseys China Wholesale Soccer Jerseys Free Shipping Cheap NFL Jerseys