If you try to stretch your film by not improving the video enhance the complete two supports, you'll probably metallized film capacitor discover the first image is fogged. So be sure to breeze the complete two supports.

Although the SRT has a robust film transport, if you don't engage the video onto the take up reel effectively, it is possible for the video to slip 100 % free. If this happens, the video metallized film capacitor manufacturers will not enhance. In essence, you will breeze up taking all your exposures on one single structure.

Minolta obviously realized this could be a problem, as they included a "Safe Load" signal on later models of the SRT series. Don't be concerned if you own one of the majority of the SRTs that do not have this feature. It is easy to see if the video is packed effectively.

Use the same convert back again trick described to confirm for packed film. After you have closed the rear again and turned the breeze handle twice, flip up the video motor running capacitor convert and properly try to breeze the video reverse clockwise. (Do not press the clutch i465 black button) If you can move the convert more than half a convert, the video has probably fallen 100 % free. Wind it in reverse a few more turns, start the rear again and refill the video effectively.